Top

2024 Generac Protector 80KW #RG08045

$28,119.00

Overview

Availability Brochure

Year2024

MakeGenerac

ModelProtector 80KW #RG08045

Product Features

Description

Provides essential circuit power protection for your home, ensuring the necessities remain powered during an outage. This affordable automatic standby generator offers protection for about half the cost of central air conditioning.

Key Features

BEST IN CLASS Generac Designed & Built, 4.5L Engine - Purpose-built exclusively for generator use & designed from the ground up by Generac and made in Wisconsin. Utilizes the first in class, dual-valve ultra-low pressure fuel delivery system and intelligent proprietary engine controls that manage over 100 performance functions to ensure peak efficiency. Generac is one of the only manufacturers to design & produce a complete generator which includes our own engine, alternator, fuel system, controller and enclosure in the U.S.
Alternator Excellence - Excellent Motor Starting Capability - Motors start without issue upon initial startup. Key for homes and businesses with a large amount of motor load (e.g. air conditioning, process equipment, etc.).
Less than 5% total harmonic distortion (THD) – safe for sensitive electronics
Generac designs its high-efficiency alternator insuring industry-leading surge protection, performance, and longevity.
Fuel Performance - New engine requires up to 25% less fuel at full load and makes power with lowest fuel pressure in the industry (3.5” of Natural Gas)
Mobile Link™ Connectivity - Comes standard with all Protector Series generators. Mobile Link allows you to monitor the status of your generator from anywhere in the world using a smartphone, tablet or PC. Easily access information, such as the current operating status and the generator’s maintenance schedule. Connect your account to an authorized service dealer for fast, friendly and convenient assistance. With Mobile Link, your generator is taken care of before the next outage.
5-Year Limited Warranty - Consistent with the Protector Series lineup, 5-year limited warranty is standard through 80kW

Generator Specifications

Rotor Insulation Class: H
Stator Insulation Class: H
Telephone Interference Factor (TIF): <50
Alternator Output Leads 1-Phase: 4 wire
Alternator Output Leads 3-Phase: 6 wire
Bearings: Sealed Ball
Coupling: Flexible Disc
Excitation System: Brushless

Voltage Regulation

Type: Electronic
Sensing: Single Phase
Regulation: ±1%

Governor Specifications

Type: Electronic
Frequency Regulation: Isochronous
Steady State Regulation: ± 0.25%

Electrical System

Battery Charge Alternator: 12 Volt 35 Amp
Static Battery Charger: 2 Amp
Recommended Battery (battery not included): Group 27, 725 CCA
System Voltage: 12 Volts

Generator Features

Revolving field heavy duty generator
Directly connected to the engine
Operating temperature rise 120 °C above a 40 °C ambient
Class H insulation is NEMA rated
All models fully prototyped tested

Enclosure Features

Aluminum weather protective enclosure: Ensures protection against mother nature. Electrostatically applied textured epoxy paint for added durability.
Enclosed critical grade muffler: Quiet, critical grade muffler is mounted inside the unit to prevent injuries.
Small, compact, attractive: Makes for an easy, eye appealing installa-tion.
SAE: Sound attenuated enclosure ensures quiet operation.

Engine Specifications

Make: Generac
Model: In-line 4 cylinder
Displacement (Liters): 4.5 L
Bore: 4.5 in. (114.3 mm)
Stroke: 4.25 in. (107.95 mm)
Compression Ratio: 8.85:1
Intake Air System: Turbocharged and aftercooled
Lifter Type: Hydraulic

Engine Lubrication Sysrem

Oil Pump Type: Gear
Oil Filter Type: Full flow spin-on cartridge
Crankcase Capacity: 12 qt (11 l)

Engine Cooling System

Type: Ethylene Glycol 50/50 Mix
Water Pump: Belt driven
Fan Speed: 2,100 RPM
Fan Diameter: 22 in. (55.9 mm)
Fan Mode: Pusher

Fuel System

Fuel Type: Natural gas, propane vapor
Fuel Shut Off Solenoid: Standard
LP Fuel Pressure: 7-14 in Water Column
NG Fuel Pressure: 3.5-14 in Water Column

Generator Output Voltage/kW - 60 Hz

120 / 240 V, 10, 1.0 pf: kW LPG: 70; Amp LPG: 312; kW Nat. Gas: 70; Amp Nat. Gas: 333; CB Size (Both): 400
120 / 208 V, 30, 0.8 pf: kW LPG: 70; Amp LPG: 260; kW Nat. Gas: 70; Amp Nat. Gas: 278; CB Size (Both): 300
120 / 240 V, 30, 0.8 pf: kW LPG: 70; Amp LPG: 226; kW Nat. Gas: 70; Amp Nat. Gas: 241; CB Size (Both): 300
277 / 480 V, 30, 0.8 pf: kW LPG: 70; Amp LPG: 113; kW Nat. Gas: 70; Amp Nat. Gas: 120; CB Size (Both): 150

Engine Fuel Consumption

Exercise cycle: Natural Gas - 103 ft³/hr; 2.9 m³/hr; 0.9 gal/hr; Propane - 33.2 ft³/hr; 3.5 l/hr
25% of rated load: Natural Gas - 292 ft³/hr; 8.3 m³/hr; 2.6 gal/hr; Propane - 93.6 ft³/hr; 9.7 l/hr
50% of rated load: Natural Gas - 534 ft³/hr; 15.1 m³/hr; 5.7 gal/hr; Propane - 208.8 ft³/hr; 21.7 l/hr
75% of rated load: Natural Gas - 799 ft³/hr; 22.6 m³/hr; 8.3 gal/hr; Propane - 303.2 ft³/hr; 31.5 l/hr
100% of rated load: Natural Gas - 1,063 ft³/hr; 30.1 m³/hr; 10.8 gal/hr; Propane - 393.2 ft³/hr; 40.9 l/hr

Surge Capacity in Amps

120/240 V, 10: (15%) 283; (30%) 600
120/208 V, 30: (15%) 236; (30%) 500
120/240 V, 30: (15%) 204; (30%) 432
277/480 V, 30: (15%) 102; (30%) 192

Engine Cooling

Air flow (inlet air including alternator and combustion air): 3,197 in. cfm (90.5 cmm)
System coolant capacity: 4.5 gal. (17 L)
Heat rejection to coolant: 204,570 BTU per hr
Maximum operation air temperature on radiator: 150°F (66 °C)
Maximum ambient temperature: 140°F (60 °C)

Combustion Requirements

Flow at rated power: 170.4 cfm (4.8 cmm)

Sound Emissions

Sound output in dB(A) at 23 ft (7 m) with generator in exercise mode* : 68

Exhaust

Exhaust flow at rated: 181 cfm (5.1 cmm)
Exhaust temperature at muffler outlet: 1,213 °F (656 °C)

Engine Parameters

Rated Synchronous: 1,800 rpm

Power Adjustment for Ambient Conditions

Temperature Deration: 3% for every 10 °C above 25 °C or 1.65% for every 10 °F above 77 °F
Altitude Deration: 1% for every 100 m above 915 m or 3% for every 1,000 ft above 3,000 ft

Controller Features

Two-Line Plain Text LCD Display: Simple user interface for ease of operation
Mode Switch: Auto - Automatic Start on Utility failure 7 day exerciser ; Off - Stops unit Power is removed Control and charger still operate ; Manual - Start with starter control, unit stays on If utility fails, transfer to load takes place
Programmable start delay between 10-30 seconds: 10 sec standard
Engine Start Sequence: Cyclic cranking: 16 sec on, 7 rest (90 sec maximum duration)
Engine Warm-up: 5 sec
Engine Cool-Down: 1 min
Starter Lock-out: Starter cannot re-engage until 5 sec after engine has stopped
Smart Battery Charger: Standard
Automatic Voltage Regulation with Over and Under Voltage Protection: Standard
Automatic Low Oil Pressure Shutdown: Standard
Overspeed Shutdown: Standard, 72 Hz
High Temperature Shutdown: Standard
Overcrank Protection: Standard
Safety Fused: Standard
Failure to Transfer Protection: Standard
Low Battery Protection: Standard
50 Event Run Log: Standard
Future Set Capable Exerciser: Standard
Incorrect Wiring Protection: Standard
Internal Fault Protection: Standard
Common External Fault Capability: Standard
Governor Failure Protection: Standard

NOTES:

All ratings in accordance with BS5514, ISO3046, ISO8528, SAE J1349 and DIN6271 *In exercise mode Fuel pipe must be sized for full load. For Btu content, multiply ft³/hr x 2,520 (LP) or ft³/hr x 1,000 (NG). For megajoule content, multiply m³/hr x 93.15 (LP) or m³/hr x 37.26 (NG).