2018 Easy Kleen Commercial Hot Water Electric MAX-4 EZO1520E

Features may include:

• Commercial Duty triplex plunger pump with oil bath crankcase, stainless valves and all brass manifolds, direct drive, 3400 RPM on gas models, 1750 RPM on electric models.

• Farm Duty full 1.15 service factor TEFC manual reset overload protected motor.

• Adjustable pressue regulator, Downstream chemical injector, Thermo pump protection, 36" single lance c/w heavy duty trigger gun all quick coupled and all units have 50' 3/8" high pressure hose and five nozzles.

• Cold Water: Portable frame pneumatic tires with flip down handle all power coated. Hot Water: Rugged 12 gauge bent one piece steel frame all welded with lifting bar and roll cage frame all powder and housing a 10 gallon poly fuel tank. A hose reel can be mounted on the front plate. 3/4" axles are welded to frame and 13" pneumatic wheels are held on with 3/4" nuts.

• Heating Coil, elliptically wound cold process of stretched reduced full body normalized ASTM A53/APIPSL schedule 80 pipe, and is structurally braced to minimize pipe wear and vibration, all completely sealed with ceramic blanket with stainless steel coil skin for total efficiency. You will save time and money on heat up time and fuel every time you use an Easy Kleen hot water cleaning system.

• Quality North American made Oil fired burners with adjustable thermostats are used for efficiency, dependability and serviceability.

• Electrical Nema 4 water tight control panel with easy access, heavy duty on/off cam switch standard or optional auto stop/start with time delay shut down all mounted in a hinged Nema 4 control panel with quality components.