2018 Hay King Series I - Wide Rigid 1500-410

Strong and aggressive, the new Miller Series I Offset Discs are designed to withstand heavy usage while providing smooth leveling action. The same machine easily adjusts from plowing to a finish discing action! Miller discs are built with the strength and durability to meet the heavier usage of today's farming requirements and to provide the best possible tillage performance for the fuel and time expended

Four Series I Offset models re available to meet different situations - narrow or wide frame rigid and two-section or three-section fold-up flex. All models share the same basic Series I components, strength and performance capability

Series I discs feature a patented hydraulic axle cylinder control that provides positive mechanical discing depth control, as well as wheel transport lock-down

On flex models, the axle control is automatically sequenced with the wing folding cylinder in both up and down operation. This allows the wings to be lifted slightly for turns after the machine is raised, which eliminates side turning pressure on the wing wheels. The operator can make tighter turns, more easily, since the machine pivots on the main frame wheels only.

To assure smooth folding action on the thee-section model, cylinder oil is flow-divided so both wings raise evenly. When the machine is lowered, the wings let completely down and release for flexing before the blades lower into the ground

The advanced hydraulic concept provedes for both axle and folding actions be be easily regulated by single tractor control valve

Series I discs feature Miller's patented hydraulic leveling action and handling of the disc from the tractor seat, as well as providing sideways control to hold the machine straight behind the tractor on hillsides.

The leveling control is simple, easy-to-use, and adds greatly to the ease of operation and performance of the machine.

Miller Series I Offset Discs Utilize advanced styling to gain the utmost in strength and performance capability for each machine type. These rugged models are available in 22", 24" or 26" diameter blades, plain or notched edges, in different gauges to meet specific requirements. Disc blade spacing is close in the front section for better residue and wed cutting action, with wider back section spacing to more easily handle and condition the soil.

Frames and hitch are built of 5" x 3" and 5" x 5" tubing, heavily braced and with doubled tubing in high stress areas. Disc gang sections are held to the frame by a heavy double-pin clamping system that is extremely strong. Gang angle is adjustable from 17 minimum to 23 maximum to accommodate both heavy and finish work

Shafts are furnished as standard in 1 3/4 high carbon cold-drawn steel. For extreme conditions, shafts are available in heat-treated steel.

Also standard are steel spacing spools for extreme durability. All wheels have adjustment for side leveling if needed.

Features may include:

• Triple-sealed 211 disc section ball bearings on 1 3/4" shafts.

• Heavy-duty hubs with 6-bolt wheels.

• 9.5L x 15 tires on 1600 & 1700 axles

• 11L x 15 tires on 1500 & 1800 axles & 1900 wing axles

• 12.5L x 15 tires on 1900 main frame axles

• Axle control cylinder

• Fold-up cylinders on flex models

• Hydraulic leveling

• Hydraulic hoses

• Blade scrapers

• adjustment wrenches