2018 Kverneland Trailed Pull-Type Disc Mower 4140 L

The all-new Kverneland 4132 L and 4140 L are easy to operate and have a low power requirement which reduces the fuel consumption and therefore allow the mowers to be used with smaller tractors. Based on a responsive floatation system these mowers have a remarkable ability to adapt to the ground structure which improves the grass flow and provides a gentler handling of the crop. It also protects the cutterbar from unforesseen obstacles which may occur. Kverneland 4132 L and 4140 L have a sideward adaption which allows a movement up and down of 8.5 to each side in total 17.

Features may include:

• Working width: 3.16m and 3.92m

• Responsive Floatation ensures an even pressure across the entire cutterbar in uneven conditions

• Easy to connect to every tractor

• Outstanding ground following ability

• Fully welded cutterbar with round discs

• Exceptional ability to adapt to the ground conditions

• Ensures an even pressure across the entire cutterbar in uneven conditions

• The range is 350mm (12) upwards and 235mm (9) downwards

• Sideward adaption which allows a movement up and down of 8.5 to each side in total 17

• Generates many benefits when working on hillsides or along ditches, and also makes it easier to control the unit on headlands

• The gearbox is fixed to the mainframe in order to ensure less movement during operation

• Provides unlimited rotational movement between the machine and the tractor

• Makes it easier to perform sharp turns

• Kverneland uses round discs. Round discs are less susceptible to stone impact, and reduce shock loads in the transmission.

• Stones are expelled immediately, before they have any chance of becoming jammed. The benefits are lower repair and maintenance costs - at the same time as a clean and aggressive cut.

• The cutterbar has a high oil capacity, ensuring a very low working temperature. This ensures an efficient oil cooling and lubrication of the entire cutterbar.

• The long curved gear wheels running in oil provides a very quiet and reliable power transmission.

• The fully welded cutterbar gives a very stiff and strong design for high durability.

• With the ProFit quick knife change system, maintenance of the cutting ability is easy. The knives are changed by one simple operation using the special lever