2018 Landoll 7500 Series VT Plus 7530-29

How can Americas favorite vertical tillage machine be made even better? That was a tough challenge for the design engineering department and sales staff, but listening to feedback from 7400 VT Plus customers was critical. Customers were asking for a VT unit that could adapt to changing field environments and could be used in a variety of residue conditions. The result is the all new 7500 Series VT Plus with Adjustable Gangs.

The adjustable gang feature allows the operator to change the angle of the disc gangs anywhere between 5 and 15 degrees on the go from the comfort of the tractor cab. Are field conditions changing and your vertical tillage operations need to be less aggressive or more aggressive? Not a problem for the 7500 VT Plus. Just change the gang angle on the fly to adapt to changing conditions. Does more or less residue need to be buried to properly prepare your seedbed? Not a problem for the 7500 VT Plus. One machine can handle varying types of residue and create the field finish you desire from your vertical tillage unit.

The 7500 Series VT Plus with Adjustable Gangs still has the same proven features as its predecessor. The 24 smooth blades stay sharper longer and handle rocks and stones better than the ripple or fluted blades offered by competitive brands. In wet, sticky conditions, the smooth surface sheds residue better and is easily kept clean by heavy-duty scrapers.

The 7500 VT Plus is carried by walking tandem wheels and high flotation tires for outstanding ground following capabilities. The wider tires leave a minimal impression in the soil, allowing the unit to be run at shallower depths. The folding models fold to a narrow transport width and the weight of the machine is equally distributed on the transport tires.

Every disc gang is equipped with C-flex hangers that provide cushion protection against rocks and other obstructions. The scraper bar is mounted to the C-flex hangers allowing scrapers and disc blades to move simultaneously with each other. The self-aligning feature of each trunnion bearing allows bearing realignment as the hangers flex and move. Bearings are triple-lip sealed and cannot be over-greased and are covered by Landolls three-year limited warranty policy.

The rockshaft is protected by UHMW polymer which eliminates wear and maintenance requirements. Hinge joints are equipped with hardened pins that rotate on maintenance-free polymer bushings for improved machine performance and extended life of the hinge.

Features may include:

• 14' Rigid and 23', 26', 29' and 32' Folding Units Available

• 24" Low Concavity Blades with 7" Spacing with Infinitely Adjustable Gang Angles from 5 to 15 Degrees; Adjustable On the Go

• Trunnion Bearings with Triple Lip Seals Mounted on C-Cushion Bearing Standards

• Adjustable 5 1/2" Scrapers with Heavy-Duty 1/2" Spring Steel Arm

• Scraper Mounting Bracket Attached to the C-Cushion Bearing Standard

• 5 1/2" Lift Axles With Maintenance Free Lift System

• Walking Tandems and Greaseable Pivots

• Floatation Tires (Model Dependent) With 8-Bolt Wheels and 3" Slip-In Spindles

• Self-Leveling Hitch with Hydraulic Leveling Adjustment

• Cast Single Lip Hitch Cat. III or Cat. IV (Model Dependent)

• 14" Diameter Reels With 7/8" Round Rods With 2 Arms and Spring Loaded Down Pressure Per Section

• Frount Mounted Swivel Gauge Wheels on Wings

• Single Point Depth Control