2016 Palfinger Liberator 4000

Liberator 4000 cranes come complete with 25 foot power cable, crane ground cable, a 225 amp fuse, a 4 foot frame grounding cable, 25 remote control pendant and owners manual. All Liberator 4000 cranes are shipped assembled, factory tested and ready to go to work. Minimum chassis size, 10,500 GVW. 1000 amp CCA, deep cycle battery is required. A 150 amp alternator is recommended.

Features may include:

• Self-contained 12 Volt DC hydraulic system supplies 2.2 gallons per min, powered by high-output extended on time series wound motor.

• Automatic overload protection prevents hoist up, boom extension and boom down.

• Anti two-block system standard on all cranes with power extension.

• Large diameter, self-locking, all steel worm gear rotation drive mounted on steel slewing ring crane bearing provides 360 degree continuous power rotation.

• Load cushioning counterbalance/check valves on all cylinders for precise load holding and handling.

• Safety valves on all cylinders prevents load drop if hose fails.

• 100% Solid-state control system with arc-suppression circuitry for extended life of switches, contactors and motors.

• 4,000 lb. max. capacity, 16,000 ft-lb moment rating.

• Hydraulic boom elevation from 5 to 75.

• 25 remote control pendant with Quik-Turn connector.

• Planetary gear hoist is designed for maximum power, efficiency and hook speed.

• Industrial grade electrical contactors, no automotive type solenoids.

• 80 of 1/4 wire rope. Hoist drum and wire rope are on the outside of the boom where they are visible to the operator.

• Permanently lubricated polymer wire rope pulleys reduce wire rope wear.

• Boom extensions slide on low friction self-lubricating polymer slide pads.

• Meets OSHA 1910.180 requirements and ANSI B30.5. safety standards

• Powder coat finish for high gloss and durability.

• Mounting bolts provided (4 ea. 3/4 dia. gr 8).