2018 Sukup Axial Heaters - 18", 24", 26", 28" Super Low-Temp

Sukup manufactures a full line of axial fans and heaters for aerating and drying grain. Sukup Axial Fans provide maximum airflow at lower static pressures found in aeration or in-bin drying. Sukup also offers 38 and 44 low speed axial fans for roof dryers and other shallow grain depth applications.

• Sukup Axial Fans give the highest airflow for the money!

• 3500 RPM motors used in Sukup Axial Fans have been specially-engineered for Sukups high-performance blades.

• Square end plates give uniform support all around the housing while eliminating legs that concentrate stress and distort the housing. Square housings also maintain the accurate roundness of the housings, allowing for close fan blade tip clearance.

• Close tip clearance increases airflow by preventing air from blowing back through the area between the blade and housing.

• Fan blades are precision-balanced for vibrationfree operation

• Blades are secured to the motor shaft with Trantorque bushings to ensure the most secure attachment, as well as serviceability.

• Galvanized housings resist rust and look good for years to come.

• Two-year limited warranty

• Highest Airflows in The Industry

• Square End Plates For Increased Housing Strength

• Safety First Fan Blade Mounted Downstream of Motor

• Heaters

• Large Access Door

• 2. Very Efficient Burner Design

• 3 Year Warranty on Reliable Circuit Board

• Extensive testing has produced a heater with an intense blue flame, allowing complete, clean combustion. In fact, independent tests have shown that Sukup heaters burn with the highest efficiency range.

• Starfire-type burners provide the critical gas and air mixture for higher efficiency and even heat distribution.

• Sukup heaters ignite quickly, even at low pressures.

• Two-year warranty on components.

• Three-year warranty on solid-state circuit board.

• Air straightening vanes provide better heat distribution.

• Available for use with vapor propane, liquid propane (with vaporizer) or natural gas.

• Two-way adjustments on the vaporizer allow operation over a wider range of outside temperatures.

• The exclusive Sukup vaporizer high limit features manual reset, so you can tell if the vaporizer needs to be adjusted.

• Stainless steel flame sensor is more reliable and will last longer than flame probes.

• Galvanized housings resist rust.

• Thermostat, humidistat, high-low thermostat or modulating valve available.

• Optional Deluxe Control Box includes a static pressure gauge and thermometer. Available as single or dual controls.

• Optional Dual Burner Controls are needed if there is more than one heater on a bin, so that they cycle on and off together for even heat.

• CSA models available.

• Extra safety features increase reliability

• Stainless steel flame sensor

• Transition high limit shuts off heater if the temperature entering the bin gets too hot.

• Pressure relief valves

• Vapor high limit

• Burner high limit

• Purge delay

• Spring-loaded solenoids

• Grounded electrical components

• Airflow Ratings for Aeration Applications

• Certified Airflow Ratings for 24 & 28 Axial Fans

• Airflow Ratings for Low Speed Axial Fans (38 & 44)