2018 Teagle Tomahawk Bale Processor 5050XL

Provide an even and absorbent bed of straw.

Baled silage that is lightly shredded with a Tomahawk is more palatable and easily consumed.

Blow straw up to 35', discharge to one or both sides of the tractor. Alternative delivery chutes are available to suit your requirements.

Discharge silage to the right hand side only into a ring feeder or along a feed barrier.

The Tomahawk 4040, 5050 and 5050XLM models use Blades to chop dry or wet material. With very wet material the chop length may be as low as 4 cm, and dry material will be around 15cm. long.

Easy control of output by adjusting the speed of drum rotation.

• Tomahawk 4040 - Suitable for 1.2m (4') diameter bales.

• Tomahawk 5050 - Suitable for 1.5m (5') diameter bales.

• Tomahawk 5050XL - Suitable for 1.5m (5') diameter bales and full size Hesston bales.

Various drum extensions are available for ease of operation or to accommodate larger rectangular bales.

• For your peace of mind Tomahawks are backed by an efficient after sales service from our production facility in Cornwall, England.

• The Tomahawk Drum models are economical, simple and robust. There are no gearboxes, with the drive to the rotor being direct from the tractor, a hydraulic motor is used to rotate the drum. Due to their simplicity and strength, customers can expect a long service life from their Tomahawk.

Features may include:

• Direct drive from tractor to rotor - no gearbox.

• Can feed bales of silage or spread bales of straw with no problems.

• Netting or wrap is easily removed at a safe working height. Adjustment of the drum angle with the optional hydraulic top link makes this operation even easier.

• Chutes on the left and right hand sides can be opened and closed independently.

• For driveline protection a slip clutch is fitted as standard on the PTO shaft.